General Disclaimer For Shipco® Supplied Content
Shippensburg Pump Company (or "Shipco®") disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting form the publication, use of, or reliance of any information on this website. Shipco® disclaims and makes no guarantee or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this website will fulfill any of your particular purposes or needs. Shipco® reserves the right to modify or change any or all portions of this website without notification.
In publishing and making the information on this website available, Shipco® is not undertaking to render professional or other services in lieu of a conversation with a trained, professional manufacturer's representative. Anyone using this website should rely on their own, independent judgment or, as appropriate, seek the advice of a competent, professional manufacturer's representative in determining the exercise of reasonable care in any given circumstance. Information on this website may be available from other sources, which the user may wish to consult.
On browsers: Shipco® makes no gaurantee if complete functionality or layout are hindered if this website is accessed from a non-compatible web browser or other medium. Obtaining a web browser that supports current web standards is left solely to the discretion of the client or end user accessing this site.
Disclaimer For Shipco® Provided Tools
All tools, programs and information are provided for your personal use. You must verify that the values calculated are accurate and suitable for your application.
These publications and programs are provided "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.
Any application or information may include technical inaccuracies or typographical errors. Changes may be periodically made to these publications; these changes will be incorporated in new editions of these publications. The Author may make improvements and/or changes in the products and/or the programs described and used in these publications at any time without notice.
Should any viewer of a Shipco® published document respond with information including feedback data, such as questions, comments, suggestions, or the like regarding the content of any such Shipco® document, such information shall be deemed to be non-confidential and Shipco® shall have no obligation of any kind with respect to such information and shall be free to reproduce, use, disclose and distribute the information to others without limitation. Further, Shipco® shall be free to use any ideas, concepts, know-how or techniques contained in such information for any purpose whatsoever including but not limited to developing, manufacturing and marketing products incorporating such information.
Nothing contained herein shall be construed as conferring by implication, otherwise any license or right under any patent or trademark of Shipco® or any third party. Except as expressly provided above nothing contained herein shall be construed as conferring any license or right under any Shipco® copyright.
Disclaimer With Terms & Conditions Of Use For Shipco® Drawings
SHIPCO® DRAWINGS DISCLAIMER
All intellectual property rights (including, without limitation, all copyright and design rights) expressed in the drawings and related information belongs to Shippensburg Pump Company, Inc. The User may not, under any circumstances use or allow the use of drawings with any product or system other than Shippensburg Pump Company, Inc. products or systems. This product must be installed and used in such a manner that standard operating pressures are not exceeded. This product may not be changed, altered, installed, used, or operated in any manner other than as manufactured and specified by Shippensburg Pump Company, Inc. The installation procedures and instructions as described in the product IOM Manual must be strictly followed. Any change or alteration in this product, or any deviation from the installation instructions, will void the product warranty. In addition, Shippensburg Pump Company, Inc. will not be responsible for any damages or injuries that occur to persons or property if the product is changed, altered, installed, used, or if operating pressures are increased, in any manner not consistent with and as set forth in printed materials supplied with this product by Shippensburg Pump Company, Inc.
TERMS AND CONDITIONS OF USE OF SHIPCO® DRAWINGS
The reproduction and use of this material is only authorized for purposes connected with the specification or use of Shippensburg Pump Company, Inc. products and systems. This information may not contain the full details required for use of this product or system. It is the User's responsibility to ensure full performance specifications and to ensure specification and installation of Shipco® products and systems are in accordance with Shipco® manuals, catalogs, or other distributed literature. The User should seek expert advice to ensure suitability of these drawings for your specific application. The user is responsible for complying with all federal, state, or local regulatory laws, permit requirements, and codes.
THESE DRAWINGS ARE FURNISHED FOR INFORMATION ONLY. ALL DIMENSIONS SHOWN ARE SHEET SPECIFIC. USE OF THESE DRAWINGS (INCLUDING DESIGN AND DIMENSIONS) MUST BE CHECKED BY THE USER’S ENGINEER TO ENSURE DESIGN IS ADEQUATE FOR THE INTENDED USE. THESE DRAWINGS WILL BE REVISED PERIODICALLY AND IT SHALL BE THE RESPONSIBILITY OF THE USER OF THESE FILES TO KEEP THEM CURRENT WITH ANY UPDATES.
Shippensburg Pump Company, Inc. accepts no responsibility or liability for any loss or damage caused to the User or any third party through any use of the drawings or related information, which use contravenes these terms of use, including but not limited to, any use of the drawings and related information. Since revisions or additions to the design file Drawings and Details may occur at any time, the User agrees to indemnify, defend and hold harmless Shippensburg Pump Company, Inc., its officers, agents, and employees from and against any and all claims, suits, losses, damages or costs, including reasonable attorney's fees, arising from the use of outdated design file Drawings and Details, and such indemnification shall survive acceptance of said file(s) by receiver.
The design files Drawings and Details represent intellectual property owned by Shippensburg Pump Company, Inc, that are the subject of either copyrighted or patented material. All such copyrights or patents are owned by Shippensburg Pump Company, Inc. Any use of this material without the express written consent of Shippensburg Pump Company. Inc. is strictly prohibited. Shippensburg Pump Company, Inc. assumes no liability for hardware or software damage that may result from the use of the electronic files provided on disk, tape or by electronic transfer due to unknown viruses that may reside on the electronic media when transferred to the end user.
These terms and conditions constitute the complete and final agreement of the parties hereto.
Disclaimer For Links To "Other Sites"
The links to other websites are provided as a convenient reference service. Shippensburg Pump Company has no specific affiliation with any of the groups or associations, except as routinely addressed in the day-to-day workings of our industry. Use of the information or services provided by linked companies, groups or associations noted herein is entirely at the discretion and risk of the user. Shippensburg Pump Company is to be held harmless from any issues, conditions, etc., arising from that use.
Although we try to keep these links up to date, we cannot always foresee the many changes that take place on the internet. If any link repeatedly fails or becomes outdated, please advise the webmaster using the contact page. Include details such as the internet address with file path to the document and the specific link name that fails.